Wells SS-4 Specifications download pdf (Page 4)

FEATURES & OPERATING CONTROLS

A. INFINITE SWITCH

1. On INFINITE SWITCH CONTROLLED warmers, power is

applied to the heating element based on the control knob

position, which varies the duty cycle of the heating element.

2. The desired temperature is controlled by rotating the

TEMPERATURE CONTROL KNOB. The knob may have a

numeric scale, where higher numbers correspond to higher

temperature. LO is the lowest temperature setting; PREHEAT

is a “continuous on” setting. Innite switch controlled warmers

are equipped with a hi-limit device to prevent overheating. The

hi-limit will self-reset after the warmer has cooled.

3. On warmers equipped with an INDICATOR LIGHT

, the light will

glow when the innite switch is in any position other than OFF.

4. The TEMPERATURE CONTROL KNOB will rotate without

stopping, with PREHEAT and OFF having obvious detents.

The OFF position is a “positive” OFF (i.e. the switch is positively

held in the open position).

NOTE: An innite switch controls temperature by varying the ratio of

“on” time to “off” time. Thus, no temperature sensing devise is required.

B. MOUNTING

1. Top-mounted drop-in warmers are equipped with WELLSLOKS

uniquely designed turnout tabs which help secure the warmer

top ange to the countertop.

2. See the Installation Instructions, supplied with the particular

appliance, for details.

C. DRAINS

1. “D” units (e.g. SS-10D) have drains for each well, with each pan

having an individual drain valve.

IL2469

WELLSLOKS

IMPORTANT:

DO NOT LEAVE ON

“PREHEAT”

Unit may cycle on hi-limit

control, leading to premature

failure of the hi-limit control

device.

INDICATOR

LIGHT

TEMPERATURE

CONTROL

(INFINITE

SWITCH)

IL2614

2M-308034; Drop-In Round Warmer w/Innite Switch Control

1 2 3 4 5 6 7 8 9 ... 15 16

Comments to this Manuals

No comments

Wells SS-4 Specifications Page 4

Comments to this Manuals

Related products and manuals for Food warmers Wells SS-4