Wells SS-4 Specifications download pdf (Page 6)

UNPACkING & INSPECTION

Carefully remove the appliance from the carton. Remove all protective

plastic lm, packing materials and accessories from the Appliance

before connecting electrical power or otherwise performing any

installation procedure.

Carefully read all instructions in this manual and the Installation

Instruction Sheet packed with the appliance before starting any

installation.

Read and understand all labels and diagrams attached to the

appliance.

Carefully account for all components and accessories before discarding

packing materials. Store all accessories in a convenient place for later

use.

INSTALLATION NOTES

1. Installation and start up of built-in warmers MUST be performed

by an authorized installation company.

2. It is the responsibility of the installer to verify that this warmer

installation is in compliance with the specications listed in this

manual and on the specication sheet provided.

3. It is the RESPONSIBILITY OF THE INSTALLER to check with the

authority having jurisdiction, in order to verify that this warmer

installation is in compliance with local code requirements.

4. Water supply and drain installation must meet all applicable local,

state and federal plumbing codes and ordinances.

5. Refer to Installation Instructions included with the warmer for

Underwriters Laboratories conditions of acceptability, electrical

requirements and other installation concerns.

BUILT-IN WARMERS

1. This is a GENERAL GUIDE. For specic cutout

dimensions and other installation details, refer

to the Installation Instructions supplied with the

warmer.

2. Cutout dimensions for warmer units and control

panels are listed on the Installation Instructions

provided with the warmer.

3. Verify style of control panel (i.e. square, oval,

etc.) before making cutout.

NOTE: Cutout dimensions are different for square

and oval control panels, and for wood and metal

counters. Verify the dimensions are correct for the

installation before making the cutout.

INSTALLATION

SQUARE

OVAL

NOTE: DO NOT discard

the carton or other packing

materials until you have

inspected the appliance for

hidden damage and tested it

for proper operation.

Refer to SHIPPING DAMAGE

CLAIM PROCEDURE on

the inside front cover of this

manual.

WARNING:

RISk OF INjURY

Installation procedures must

be performed by a qualied

technician with full knowledge

of all applicable electrical and

plumbing codes. Failure can

result in personal injury and

property damage.

CAUTION

FIRE HAzARD

Avoid storing ammable or

combustible materials in, on or

near the appliance.

IMPORTANT: For warmers

installed in plastic counter

tops, the counter material

must be protected from the

heat of the warmer in order to

prevent discoloration and/or

deterioration. Wellsloks are

not suitable for this purpose.

The installer should contact the

manufacturer or distributor

of the countertop material for

specic instructions.

2M-308034; Drop-In Round Warmer w/Innite Switch Control

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comments to this Manuals

No comments

Wells SS-4 Specifications Page 6

Comments to this Manuals

Related products and manuals for Food warmers Wells SS-4