Wells WFPE-68KFC Specifications Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
TROUBLESHOOTING SUGGESTIONS
SERVICE
16
Problem Possible Cause Suggested Remedy
No power to fryer Fryer unplugged or circuit breaker off or
tripped
Connect fryer to power
Reset circuit breaker
Power switch off or damaged Press power switch to ON
Replace power switch
Blown fuse Correct cause of fuse failure
Replace fuse
No power -
"service" light lit
Hi-limit safety tripped Allow to cool, reset safety
Hi-limit safety trips often Thermobulb contaminated with crumbs Clean hi-limit thermobulb
Temp sensor contaminated with crumbs Clean temperature sensor probe
Temp sensor or wiring damaged Check wiring for damage, repair as req'd.
Replace temperature sensor probe
Hi-limit safety or thermobulb damaged Replace hi-limit safety
24v relay R1 damaged (welded
contacts)
Replace relay R1
Controller damaged If relay R1 remains energized at all oil temps,
replace controller
Fryer does not heat
"power" light lit
"heat" light lit
"service" light not lit
Wiring damage (elements, contactors) Check wiring for damage, repair as req'd.
Damaged E-Safe relay Replace E-Safe relay
Damaged back-up contactor Replace back-up contactor
Fryer does not heat
"power" light lit
"heat" light not lit
"service" light not lit
Temp sensor or wiring damaged Check wiring for damage, repair as req'd.
Replace temperature sensor probe
Relay R3 or wiring damage Check wiring for damage, repair as req'd.
Replace relay R3
24v relay R1 or wiring damaged Replace relay R1
Controller damaged If no 24v to R1 when calling for heat , replace
controller
Fryer will not build
pressure
Insufficient moisture in product Cook only authorized product
Lid o-ring damaged or missing Replace lid o-ring
Dead weight damaged or dirty Clean dead weight, replace if req'd.
Pressure relief body damaged or dirty Clean pressure relief body, replace if req'd.
Relief pin bent or dirty Clean relief pin, replace as req'd.
Pressure relief valve damaged Replace pressure relief valve
Pressure gauge damaged Replace pressure gauge
Solenoid damaged Replace solenoid
Connecting link or cotter pin damaged Replace connecting link and cotter pins
Pressure hose damaged Replace pressure hose
24V relay R2 or wiring damaged Check wiring for damage, repair as req'd.
Replace relay R1
Controller damaged If no 24v to R2 during pressure phase of cook
cycle, replace controller
24v transformer damaged Replace transformer
These troubleshooting suggestions are intended for use by qualified technical personnel only.
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Comments to this Manuals

No comments