WELLS MANUFACTURING COMPANY2 ERIK CIRCLE, P. O. Box 280Verdi, NV 89439Customer Service (775) 345-0444 Ext.502fax: (775) 345-0569www.wellsbloomfield.c
PRECAUTIONS AND GENERAL INFORMATION 8 NOTE: Fire suppression system and all associated components must only be serviced by an authorized Ansul® Distr
PRECAUTIONS AND GENERAL INFORMATION (continued) 9 This appliance is intended for use in commercial establishments only. This appliance is intended to
AGENCY LISTING INFORMATION STD 4 E146882 OPERATIONAL NOTES: REPLACE PREFILTER and REPLACE FILTER PACK indicator lights provide a timely warning tha
11 INSTALLATION NOTE: DO NOT discard the carton or other packing materials until you have inspected the appliance for hidden damage and tested it for
SERVICE TECHNICIAN INSTALLATION NOTES An Ansul® technician must charge and arm the fire suppression system before the ventilator blower will operate.
INSTALLATION (continued) 13 FIRE SUPPRESSION SYSTEM INSTALLATION 1. Any REMOTE MANUAL PULL STATION must be installed by an authorized
FILTERS INSTALLATION 1. FILTER PACK: Ships installed in the hood. If the FILTER PACK is not in position, the CHECK FILTERS indicator wil
INSTALLATION (continued) 15 CAUTION: Burn Hazard DO NOT OPERATE UNLESS THE GREASE DRIP TRAY IS INSTALLED. Moisture will drip into the hot cooking su
OPERATION CAUTION: HOT SURFACE Exposed surfaces can be hot to the touch and may cause burns. VENTILATOR OPERATION 1. Press the VENTILATOR POWER s
OPERATION (continued) 17 GRIDDLE OPERATION PREPARING THE GRIDDLE SURFACE 1. SEASONING STANDARD GRIDDLES As manufactured, the steel surface
Unless otherwise specified, all commercial cooking equip-ment manufactured by WELLS MFG. CO. is warranted against defects in materials and workmanship
OPERATION 18 1. a. Be sure the TEMPERATURE CONTROL KNOB is turned to OFF. b. Lower the ELEMENT HEAD into the frypot by pushing ba
OPERATION (continued) 19 CAUTION: HOT SURFACE Exposed surfaces can be hot to the touch and may cause burns. NOTE: The chart below is intended
20 CLEANING INSTRUCTIONS CAUTION: ELECTRIC SHOCK HAZARD Disconnect appliance from electric power before cleaning. CAUTION: HOT SURFACE Expos
21 CLEANING INSTRUCTIONS (continued) FRYER SECTION CLEANING INSTRUCTIONS DANGER: BURN HAZARD Contact with hot oil will cause severe burns. Allow t
22 CLEANING INSTRUCTIONS (continued) GRIDDLE CLEANING INSTRUCTIONS PRECAUTIONS Griddle surfaces are HOT. Wear appropriate heat
23 CLEANING INSTRUCTIONS (continued) DRAWER WARMER CLEANING INSTRUCTIONS PRECAUTIONS: Turn control knob to OFF.
24 MAINTENANCE INSTRUCTIONS FRYER - DISPOSAL OF USED OIL DANGER: BURN HAZARD Contact with hot oil will cause severe burns. Allow the fryer to cool
25 MAINTENANCE INSTRUCTIONS (continued) Periodic cleaning is necessary to remove carbonization from the elements and frypot. Frypot
MAINTENANCE INSTRUCTIONS 26 DRAWER WARMER - ADJUSTMENTS AND LUBRICATION PRECAUTIONS: Turn control knob to OFF.
TROUBLESHOOTING SUGGESTIONS 27 SYMPTOM POSSIBLE CAUSE RECOMMENDED REMEDY No power to unit Not plugged in or circuit breaker tripped Plug unit into
WARRANTY xi SPECIFICATIONS
28 ANSUL®ANSUL INCORPORATEDMARINETTE, WI 54143-2542MATERIAL SAFETY DATA SHEETANSULEX Low pHQUICK IDENTIFIER (In Plant Common Name)Manufacturer’sName:
29 SECTION 5 - HEALTH HAZARDSSECTION 6 - EMERGENCY AND FIRST AID PROCEDURESSECTION 7 - SPECIAL PROTECTION INFORMATIONSECTION 8 - SPECIAL PRECA
30
MAINTENANCE SCHEDULES 1. 6-MONTH MAINTENANCE (MUST BE PERFORMED BY AN AUTHORIZED ANSUL® DISTRIBUTOR ONLY): a. Inspect and test t
DESCRIPTION SERVICE PART NO. OVEN
FEATURES & OPERATING CONTROLS Fig. 1 Ventilator Section Operating Features & Controls 2
ITEM 1. 5. a6. 8. 9. a10. a11. 12. a15. 16. 18. 19. 22. 28. a31. 38. 41. 42. 43.
FEATURES & OPERATING CONTROLS (continued) Fig. 2 Ventilator Section Controls & Indicator Lights 4 Fig. 3 Fryer Section
ITEM V.01 V.02 V.03 V.04* V.05* V.06* F.01 F.02 F.03 F.04 F.05 F.06 F.07 F.08 F.09 F.10 F.11 F.12 DE
FEATURES & OPERATING CONTROLS (continued) 6 Fig. 4 Griddle and Drawer Warmer Sections
ITEM G.01 G.02 G.03 G.04 G.05 G.06 G.07 D.01 D.02 D.03 D.04 D.05 D.06 DESCRIPTION GRIDDLE TEMPERATURE CONTROL GRIDDL
Comments to this Manuals