Wells RWN-2 User Manual download pdf (Page 11)

TROUBLESHOOTING SUGGESTIONS

SYMPTOM POSSIBLE CAUSE SUGGESTED REMEDY

No lights or heat

(all drawers)

Warmer unplugged Plug warmer into appropriate

receptacle

Circuit breaker off or tripped Reset circuit breaker

Internal damage Contact an Authorized Wells

Service Agency for repairs.

No heat (one drawer) Temperature control not set Set for desired temperature.

Internal damage Contact an Authorized Wells

Service Agency for repairs.

Food dries out

Humidity control (air vent) not set OPEN air vent for dry operation.

CLOSE air vent for moist

operation.

Water in pan evaporated or low Add water to pan.

Food gets soggy Food contacting water Use a Humitrol Rack

Water level too high Water should be no more than

1/2" deep

Humidity control (air vent) not set OPEN air vent for dry operation.

CLOSE air vent for moist

operation.

Drawer falls open Catch roller not extended before

closing drawer

Be sure catch roller is extended

before installing drawer.

Drawer catch damaged Contact an Authorized Wells

Service Agency for repairs.

Drawer falls out when opened Drawer stop dirty Clean and lubricate drawer stop

Drawer stop damaged Contact an Authorized Wells

Service Agency for repairs.

042 p/n 303334 OpM BI Drawer Warmer

1 ... 10 11 12 13 14

No comments

Wells RWN-2 User Manual Page 11