3
=
=
21
7.
Adjust the line guide vertically so that it is
midway between the line drum flanges. If the
casing or line guard come into contact with the
line drum flanges, unnecessary friction will be
caused.
6. Tighten the screw lightly.
8.
Adjust the alignment of the line guide towards
the lead block and tighten the screw. (See also
chapter 6.3, "Furling line arrangement".)
Fig. 4.3.f
Fig. 4.3.g
Fig. 4.3.h
At this stage the furling line arrangement should be tted. See "Routing of the furling line",
chapter 6.3 for instructions. After the line is tted, the line guard should be carefully re-aligned and the
locking screw permanently tightened.
Comments to this Manuals