Wells MOD-500TDM Specifications download pdf (Page 4)

FEATURES & OPERATING CONTROLS

A. THERMOSTAT

1. On THERMOSTATICALLY CONTROLLED warmers, power is

applied to the heating element according to the control knob

position and the actual temperature at the temperature sensing

thermobulb.

2. The desired temperature is controlled by rotating the

TEMPERATURE CONTROL KNOB. The knob has a numeric

scale, where higher numbers correspond to higher temperature.

3. On warmers equipped with an INDICATOR LIGHT, the light will

glow when the thermostat is calling for heat (i.e. the element is

energized).

4. The TEMPERATURE CONTROL KNOB will rotate

approximately 300º, and will reach a “stop” at both ends.

The OFF position is marked.

NOTE: The dial position is an indication of the temperature

setting. Actual temperature will vary depending upon the type of

product and food consistency.

B. MOUNTING

1. Top-mounted built-in warmers are equipped with

WELLSLOKS, uniquely designed turnout tabs which help

secure the warmer top flange to the countertop.

2. See the Installation Instructions, supplied with the particular

appliance, for details.

C. DRAINS

1. AUTOFILL units (e.g. MOD-500TDM/AF) have their individual

drain fittings manifolded together, with a single drain valve for

the entire manifold.

D. AUTOFILL

1. On AUTOFILL units, water level is automatically fed into the

"master" pan whenever that pan's thermostat is ON .

2. Water level is sensed by a WATER LEVEL PROBE in the

"master" pan.

M011C.15 2M-308026 Owners Manual for Built-In Five-Well Auto-Fill Modular Warmers

1 2 3 4 5 ... 20

No comments

Wells MOD-500TDM Specifications Page 4