Wells WB-1 Specifications download pdf (Page 10)

M212 2M-37055 Owners Manual for WB-1 and WB-2 Wafe Bakers

CLEANING INSTRUCTIONS (continued)

PREPARATION

Unplug appliance from electric power

Allow appliance to cool completely.

FREQUENCY

As needed

TOOLS

Commercial Carbon Cleaner

1” Bristle Brush, Stiff Fiber Brush

Clean Soft Cloth / Sponge

REMOVE CARBONIZATION FROM GRIDS

1. Allow the wafe baker to cool to room temperature.

2. Liberally apply a commercial carbon cleaning solution to

the grids with a new 1” bristle brush. Be extremely careful

when applying carbon cleaning solution to the grid surfaces.

DO NOT spill any carbon cleaning solution or other caustic

cleaning product on yourself or adjacent work surfaces.

IMPORTANT:

Read and follow all manufacturer’s

instructions when using commercial carbon cleaners.

Carbon cleaner can be hazardous. It is the operator’s

responsibility to use the product safely, in the manner

directed by the carbon cleaner manufacturer.

3. Close the upper grid and allow the appliance to stand for

several hours, or overnight, depending upon the extent of the

carbonization.

4. Thoroughly remove the carbon cleaning solution and black

residue using a ber brush. Wipe down the grid surfaces

carefully and thoroughly with water so that no carbon

cleaning solution remains on the grids.

IMPORTANT:

Make certain water and cleaner are not

allowed to get into internal parts. The wafe baker will be

damaged if internal components are allowed to get wet.

5. Clean the outside of the Wafe Baker by wiping it with a soft,

clean cloth dampened with warm water and a mild detergent.

NEVER USE AN ABRASIVE CLEANSER.

6. Rinse by wiping with a soft, clean cloth dampened with clean

water. Allow to air dry.

7. Re-season the grids after cleaning by spraying with a

commercial wafe baker spray.

Procedure complete

CAUTION:

CHEMICAL

BURN HAZARD

Wafe baker cleaner may

cause serious burns on

contact.

Wear protective clothing and

safety glasses when using

wafe baker cleaner.

Carefully read and follow

directions and warnings on

the label.

CAUTION:

ELECTRIC

SHOCK

HAZARD

DO NOT submerge the wafe

baker in water. If internal

components become wet, the

operator may suffer electrical

shock, and the wafe baker

will be damaged.

Use this procedure to

clean any black residue

(carbonization) remaining

on the grids after the daily

cleaning. Grids must be

cleaned to remove the black

residue, then re-seasoned, to

ensure optimal performance.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comments to this Manuals

No comments

Wells WB-1 Specifications Page 10

Comments to this Manuals

Related products and manuals for Waffle irons Wells WB-1