Wells HW-10 User Manual download pdf (Page 4)

FEATURES & OPERATING CONTROLS

A. THERMOSTAT

1. On THERMOSTATICALLY CONTROLLED warmers, power is

applied to the heating element according to the control knob

position and the actual temperature at the temperature sensing

thermobulb.

2. The desired temperature is controlled by rotating the

TEMPERATURE CONTROL KNOB. The knob has a numeric

scale, where higher numbers correspond to higher temperature.

3. On warmers equipped with an INDICATOR LIGHT, the light will

glow when the thermostat is calling for heat (i.e. the element is

energized).

4. The TEMPERATURE CONTROL KNOB will rotate

approximately 300º, and will reach a “stop” at both ends.

The OFF position is marked.

NOTE: The dial position is an indication of the temperature

setting. Actual temperature will vary depending upon the type of

product and food consistency.

B. ADJUSTABLE LEGS

1. Countertop warmers may be equipped with adjustable legs.

These legs allow for:

a. leveling the warmer

b. ventilation around the warmer, and

c. cleaning under the warmer.

2. Adjustable legs are available as options. However, if adjustable

legs are supplied with the warmed, the legs MUST be properly

installed before the warmer is placed into operation.

MOUNT INTO

THREADED

HOLES IN

WARMER

FRAME

TURN BOTTOM

PORTION TO

ADJUST

OFF

WELLS

KNOB FOR THERMOSTATICALLY

CONTROLLED UNITS

1 2 3 4 5 6 7 8 9 ... 13 14

No comments

Wells HW-10 User Manual Page 4