Wells MOD200 Specifications download pdf (Page 7)

M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers

PRECAUTIONS AND GENERAL INFORMATION

E6070

AGENCY LISTING INFORMATION

Refer to the product nameplate for the speciﬁc appliance for agency

listings. In general:

This appliance conforms to NSF Standard 4 for sanitation only if

installed in accordance with the supplied Installation Instructions.

UL Listed warmers are U Listed under UL File E6070.

STD 4

UL Listed Warmers

WARNING:

SHOCK HAZARD

All servicing requiring

access to non-insulated

electrical components must

be performed by a factory

authorized technician.

DO NOT open any access

panel which requires the use

of tools. Failure to follow this

warning can result in severe

electrical shock.

CAUTION:

RISK OF

DAMAGE

DO NOT connect or energize

this appliance until all

installation instructions are

read and followed. Damage

to the appliance may result

if these instructions are not

followed.

CAUTION:

HOT SURFACE

Exposed surfaces can be hot

to the touch and may cause

burns.

All servicin

This appliance is intended for use in commercial establishments only.

This appliance is intended to hold pre-heated food for human

consumption. No other use is recommended or authorized by the

manufacturer or its agents.

Operators of this appliance must be familiar with the appliance use,

limitations and associated restrictions. Operating instructions must be

read and understood by all persons using or installing this appliance.

Cleanliness of this appliance is essential to good sanitation. Read and

follow all included cleaning instructions and schedules to ensure the

safety of the food product.

Disconnect this appliance from electrical power before performing any

maintenance or servicing.

This appliance is not jet stream approved. Do not direct water jet

or steam jet at this appliance, or at any control panel or wiring. Do

not splash or pour water on, in or over any controls, control panel or

wiring.

Exposed surfaces of this appliance can be hot to the touch and may

cause burns.

Do not operate this appliance if the control panel is damaged. Call

your Authorized Wells Service Agent for service.

The technical content of this manual, including any wiring diagrams,

schematics, parts breakdown illustrations and/or adjustment

procedures, is intended for use by qualiﬁed technical personnel.

Any procedure which requires the use of tools must be performed by a

qualiﬁed technician.

This manual is considered to be a permanent part of the appliance.

This manual and all supplied instructions, diagrams, schematics,

parts breakdown illustrations, notices and labels must remain with the

appliance if it is sold or moved to another location.

This appliance is made in the USA. Unless otherwise noted, this

appliance has American sizes on all hardware.

Exposed

1 2 3 4 5 6 7 8 ... 40

Comments to this Manuals

No comments

Wells MOD200 Specifications Page 7

Comments to this Manuals

Related products and manuals for Food warmers Wells MOD200