Wells MOD200 Specifications download pdf (Page 14)

M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers

TROUBLESHOOTING SUGGESTIONS

There are no user-serviceable components in this appliance.

In all instances of damage or malfunction, contact your Authorized Wells Service Agency for repairs.

SYMPTOM POSSIBLE CAUSE SUGGESTED REMEDY

No power to warmer Circuit breaker off or tripped Reset circuit breaker

Warmer will not heat Temperature control not set Set control to desired temperature

Warmer trips circuit breaker

Wet insulation

Verify ﬂange-to counter seal is sound, or

reseal with food-grade silicone sealant

Pan leaking or other internal damage

Contact your Authorized Wells Service Agency

for repairs

Internal damage

Contact your Authorized Wells Service Agency

for repairs

Warmer slow to heat

Mineral deposits on pan acting as a

insulator

Clean pan(s) with delime cleaner

Wired to wrong voltage

Verify supply voltage - must match voltage on

warmer nameplate

Drain-equipped unit will not hold

water

Drain valve not fully closed Check drain valve for debris and close fully

Drain valve damaged or pan(s) leaking

Contact your Authorized Wells Service Agency

for repairs

Auto-ﬁll unit overﬂows

Water level sensor dirty Clean water level sensor

Internal damage

Contact your Authorized Wells Service Agency

for repairs

Auto-ﬁll unit does not ﬁll

Water supply turned off or restricted

Be sure water supply is turned on and water

supply hose is not pinched or twisted

Bad Probe or other Internal Damage

Contact your Authorized Wells Service Agency

for repairs

One or more pans of an auto-ﬁll

unit do not ﬁll

Blocked drain manifold Clean drain manifold

1 ... 13 14 15 ... 40

Comments to this Manuals

No comments

Wells MOD200 Specifications Page 14

Comments to this Manuals

Related products and manuals for Food warmers Wells MOD200