Wells FT-18 Specifications

IMPORTANT: DO NOT DISCARD THIS MANUAL This manual is considered to be part of the appliance and is to be given to the OWNER or MANAGER of the restaur

MAINTENANCE PROCEDURES (continued) 8 ADJUST PLATEN TENSION 1. ADJUSTMENT LOCATION a. Right platen tension adjuster is located on back of t

MAINTENANCE PROCEDURES (continued) 9 PROGRAMMING INSTRUCTIONS: A. Controller can be configured for use in four different modes: a. Single

STANDARD OPERATION NOTES: Standard pre-set MENU programs are as follow: PROGRAM TEMP TIME FUNCTION

Set the time with MENU 3 (increase) and MENU 4 (decrease). Press TEMP to save the time. The display will now advance to show zone temperature setpoi

TROUBLESHOOTING SUGGESTIONS 12 SYMPTOM POSSIBLE CAUSE SUGGESTED REMEDY Toaster will not heat (no lights or display) Unplugged or circuit breaker tri

DESCRIPTION PART NO. CRUMBTRAY 503606 TEFLON™

Unless otherwise specified, all commercial cooking equip-ment manufactured by WELLS MFG. CO. is warranted against defects in materials and workmanship

WARRANTY xi SPECIFICATIONS

FEATURES & OPERATING CONTROLS (continued) 2

This appliance is intended for use in commercial establishments only. This appliance is intended to prepare food for human consumption. No other use

INSTALLATION NOTE: DO NOT discard the carton or other packing materials until you have inspected the appliance for hidden damage and tested it for pr

OPERATION 5 WARM-UP During warm-up, both displays flash while showing the last-used MENU temperature setpoint. A MENU cycle cannot be started while

CLEANING INSTRUCTIONS PRECAUTIONS: Press MENU 4 (cleaning mode). Allow toaster to cool to 275ºF.

INSTALL OPTIONAL TEFLON™ NON-STICK SHEETS 1. LEFT PLATEN a. Raise the left upper platen, and lower the right upper platen. b. S