Wells G-606 Specifications download pdf (Page 6)

AGENCY LISTING INFORMATION

INSTALLATION

NOTE: DO NOT discard

the carton or other packing

materials until you have

inspected the appliance for

hidden damage and tested it

for proper operation.

Refer to SHIPPING DAMAGE

CLAIM PROCEDURE on the

inside front cover of this

manual.

IMPORTANT: This is a

GENERAL GUIDE. For

specic equipment and

cutout dimensions, and other

installation details, refer to

the Installation Instructions

supplied with the appliance.

IMPORTANT: Water damage

caused by failure to set

Wellsloks, failure to install

gasket, or failure to seal ange

to counter is NOT covered by

warranty.

UNPACkING & INSPECTION

Carefully remove the appliance from the carton. Remove all protective

plastic lm, packing materials and accessories from the appliance

before connecting electrical power or otherwise performing any

installation procedure.

Carefully read all instructions in this manual and the Installation

Instruction Sheet packed with the appliance before starting any

installation.

Read and understand all attached labels and diagrams.

Carefully account for all components and accessories before discarding

packing materials. Store all accessories in a convenient place for later

use.

CUT-OUT AND INSTALLATION

Cutouts

Griddles may be installed in METAL COUNTERS ONLY.

Cutout dimensions for griddles and control panels are listed on

the Installation Instructions provided with the griddle.

Refer to the Installation Instructions for Underwriters

Laboratories Conditions of Acceptability.

Mounting the griddle:

Verify that provided sealants are applied to the under side of

the griddle top ange prior to setting the unit into the cutout.

After installation, verify that the tabs on the Wellsloks are

turned out to lock the appliance into the counter (see Fig. 2).

Apply a thin bead of food-grade silicone sealant around the

ange to seal it to the counter.

Refer to the Installation Instructions for required clearances. Maintain

required clearances between the appliance and adjacent combustible

and non-combustible surfaces.

Sufcient overhead clearance must be provided to allow the element

assembly to be raised. Refer to the Installation Instruction Sheet for

required clearances.

Avoid storing ammable or combustible materials near the appliance.

This includes gasoline and other fuels, mops, rags and wrapping paper.

Fig. 2 Set the Wellslloks

This appliance conforms to NSF Standard 4 for sanitation only if

installed in accordance with the supplied Installation Instructions.

This appliance is Underwriters Laboratory recognized ( ). Since this

appliance is only a single component of a complete installation, the

nished installation of this unit requires additional evaluations to

Underwriters Laboratory standards.

Refer to Installation Instructions included with the appliance for

Underwriters Laboratories conditions of acceptability, electrical

requirements and other installation concerns.

STD 4

111 p/n 2M-303340 OpManual Built-In Electric Griddles

1 2 3 4 5 6 7 8 9 10 11 ... 39 40

Comments to this Manuals

No comments

Wells G-606 Specifications Page 6

Comments to this Manuals

Related products and manuals for Electric griddles Wells G-606